The KNIPEX StepCut 95 12 160 is a compact cable cutter developed to provide clean and precise cuts on copper and aluminium cables. It is only 160 mm long, making it easy to handle even in confined workspaces.

The cutter features a multi-component handle that provides a secure and comfortable grip during use. The special StepCut geometry means that wires are cut step by step, reducing the required force by up to 40% compared to traditional cable cutters of the same size.

The tool can cut soft, multi-stranded copper and aluminium cables with a diameter of up to 15 mm (50 mm²), as well as solid cables up to 5 × 4 mm². The blades are induction-hardened to approximately 56 HRC, ensuring long service life and precision over time.

The KNIPEX StepCut is not suitable for steel wire ropes or hard-drawn copper conductors, but it is ideal for standard installation and electrical work where clean cuts and ergonomics are important.

The Knipex 95 31 280 cable cutter is developed for cutting copper and aluminium cables, both single-stranded and multi-stranded. It is not suitable for steel wire, cables, or very fine-stranded conductors. The cutter features hardened, precision-ground blades that ensure clean cuts without material compression.

The ratchet principle allows the tool to be used with one hand, making work easier in confined spaces. The two-stage gear mechanism reduces the required force and provides a smooth and controlled cut. The compact design and light weight make handling easier.

The integrated pinch guard prevents crush injuries, and the steel-surfaced handle provides stable support during cutting. The cutter can be used for aluminium conductors up to 4 × 150 mm² sector cable and is supplied in an SB blister pack.

The Milwaukee Spare Blade Cable Cutter UG M18HCC75 is a set of cable cutter blades developed for use in underground cutters M18 HCC75 and HCC75R. The blade is made to provide precise cuts and maintain high cutting efficiency over time.

As an original Milwaukee accessory, it is designed to fit precisely into the tool’s mechanism, ensuring proper operation and long service life. It is suitable for professional users who need to replace worn or damaged cutting blades in their cable cutter.

The product is supplied as a spare part and its appearance may vary depending on configuration and technical details. Accessories are included only if specifically mentioned in the delivery contents.

The Teng Tools Cable Cutter 497 has been developed for efficient cutting and stripping of cables. The cutter features stainless steel blades that ensure a clean and precise cut, and the integrated stripping blade allows insulation to be removed from wires without damaging the conductor.

The handles are made of nylon reinforced with 30% fibreglass, providing a good balance between strength and lightness. The ergonomic grip increases comfort, even with repeated use.

With a cutting capacity of up to 22 mm cable diameter and an overall length of 138 mm, the cutter is suitable for both professional electricians and DIY users who want a precise and durable tool.

The KNIPEX 95 27 600 is a powerful cable cutter developed for two-handed use, providing the user with optimal control and cutting power when handling large cables. The cutter is deeply insulated and VDE approved, making it suitable for electrical environments.

The tool is intended for cutting copper and aluminium cables, both single- and multi-stranded, but it is not suitable for steel wire or steel ropes. The hardened, precisely ground blades ensure clean cuts without compressing the material.

The design includes a lever mechanism that provides good power transmission and reduces the force required during cutting. The pinch guard reduces the risk of hand injuries, and the adjustable screw joint allows the tool to be adapted as needed.

The blade head is screwed and replaceable, extending the tool’s service life. With a length of 600 mm and a weight of 2.26 kg, the cutter is sturdy and suitable for demanding tasks.

The Knipex 95 31 250 is a cable cutter developed to cut both single-stranded and multi-stranded copper and aluminium cables. It is not suitable for steel wire, cables, or very fine, ultra-flexible conductors.

The cutter has hardened blades with precision-ground cutting edges that ensure clean and smooth cuts without material compression. The ratchet principle allows one-handed operation and significantly reduces the required effort.

The two-stage gear drive facilitates light and controlled cutting, while the lightweight and compact design make the tool suitable for confined working conditions.

The pinch guard prevents crush injuries, and the steel-surfaced handle provides stability during use. The cutter is supplied in an SB blister pack.

The Milwaukee Jaw + Blade Cable Cutter - ACSR is a spare part consisting of a reinforced pair of jaws and a blade made of aluminium steel. It is developed for use with Milwaukee cable cutters and intended for cutting ACSR conductors (Aluminium Conductor Steel Reinforced).

The jaw and blade are supplied as a single set, allowing for the replacement of worn parts and thereby extending the lifespan of the existing tool. The reinforced steel structure increases strength and precision under load.

The product is suitable for professional users working in electrical installations, cable installations, or network maintenance, where reliable and wear-resistant components are required.

The Teng Tools cable cutter MB444 200mm has been developed for efficient cutting of copper and aluminium cables. It features a pinch guard that increases safety during use and two cutting modes that allow the cut to be adjusted according to the cable type.

The reversible handles provide additional flexibility, as the cutter can also be used for stripping cables. One-handed operation makes the tool convenient in situations where quick and precise cutting is required.

The cutter’s arms are coated with plastic for a better grip and comfort during extended use. Thanks to its 200 mm length, it is easy to handle and suitable for both professionals and DIY users.

The KNIPEX 95 36 250 is a cable cutter developed for cutting copper and aluminium conductors, both single-stranded and multi-stranded. It is not intended for steel wire or very fine, flexible conductors. The cutter uses a ratchet principle that allows thick cables to be cut with minimal physical effort.

Hardened, precisely ground blades ensure clean cuts without crushing the conductor. The two-stage gear mechanism provides a smooth and controlled cutting motion, making the tool suitable for confined spaces.

The handles are insulated with a multi-component material and VDE approved, meaning they meet the requirements for live working. The pinch guard prevents accidental injuries during use.

With a length of 250 mm and a weight of 652 grams, the cutter combines lightness and high strength. It is supplied with an SB backing/blister pack and has a black lacquered finish that protects against corrosion.

The Knipex 95 36 280 cable cutter has been developed to cut both single-stranded and multi-stranded copper and aluminium cables. It is not suitable for steel wire, cables, or very fine-stranded conductors, but provides precise and clean cuts in the materials for which it is intended.

The cutter features hardened blades with precision-ground cutting edges, ensuring smooth and controlled cuts without crushing the conductor. The ratchet mechanism allows one-handed operation, making work easier, especially in confined spaces.

The two-stage gear transmission provides a high gear ratio, so only a small amount of force is required to cut large cable cross-sections. The lightweight and compact design improves handling, and the pinch guard reduces the risk of injury during use.

The tool is VDE approved, meaning it has been tested for live work up to 1000 V, and it is supplied black lacquered in an SB blister pack.

The Milwaukee Spare Blade Cable Cutter - ACSR is an original replacement blade designed for use with Milwaukee cable cutters. It is made from reinforced aluminium steel, giving it a durable and wear-resistant structure that withstands the forces generated when cutting ACSR wires and other hard cable types.

The blade is intended as a spare part, allowing the user to replace a worn or damaged blade without having to replace the entire tool. This makes it a practical and economical solution for professionals working in electrical and cable installations.

As part of Milwaukee’s accessory programme, the blade has been developed to maintain the tool’s original performance and precision. It fits compatible Milwaukee cable cutters and ensures a clean and efficient cut when the tool is used correctly.

The Teng Tools Cable Cutter 496 250mm is made with chrome molybdenum steel blades, providing high strength and long service life. The drop-forged construction increases the tool's durability and precision during use.

The cutter features a gear mechanism that increases cutting capacity and makes it easier to cut cables with larger diameters. It can handle both copper and aluminium cables with a diameter of up to 12 mm.

The two-component handles provide a secure and comfortable grip, reducing fatigue during prolonged use. The integrated locking arm allows for safe storage of the cutter when not in use.

Thanks to its 250 mm length, this cable cutter is suitable for both precision work and more demanding tasks that require power and control.

The KNIPEX 95 16 165 SB is an insulated cable cutter designed to cut both single-stranded and multi-stranded copper and aluminium cables. It is not suitable for steel wires or hard-drawn copper conductors, highlighting its specialisation in softer cable materials.

The cutter features hardened, precision-ground blades that ensure smooth and clean cuts without crushing the conductor. The ergonomic multi-component handle provides a secure grip and comfortable use, even during repetitive tasks.

An adjustable, self-locking screw joint adds stability and long service life, while the pinch guard increases safety during work. The tool is VDE-approved and tested for electrical work, making it suitable for professional installations.

With a length of 165 mm and a chrome-plated surface, the cutter is supplied on an SB card/blister pack, making it convenient for both workshop and field service tasks.

The Knipex 95 12 200 SB is a cable cutter designed to cut copper and aluminium cables with high precision. The double blade and special blade geometry ensure a clean cut without crushing the conductor.

The cutter is not suitable for steel wire ropes or hard-drawn copper conductors, but it handles multi-stranded cables up to 70 mm² or 20 mm in diameter. The blades are hardened and precision-ground to ensure long service life and consistent performance.

By dividing the cutting process into pre-cutting and post-cutting, the user can cut even thick cables with one hand. Good leverage and ergonomic design reduce the required force during use.

The adjustable, self-locking screw joint ensures stability, while the pinch guard reduces the risk of hand injuries. The cutter is supplied in SB blister packaging and has a brown-finished surface that protects against corrosion.

The Milwaukee M18 HCC75-0C is a hydraulic cable cutter from the M18 FORCE LOGIC™ series, developed for fast and precise cable cutting. It is powered by a brushless POWERSTATE™ motor that provides high efficiency and long service life.

The tool can cut ACSR/ACSS cables in under three seconds with a force of 77.8 kN and handles cables with a diameter of up to 44 mm. The 340° rotating head provides flexibility in tight workspaces and ensures optimal positioning during use.

The built-in hydraulic pump delivers continuous pressure for maximum productivity, while Milwaukee® ONE-KEY™ technology enables wireless data collection and tool usage tracking.

The model is supplied in a case without battery and charger, making it compatible with existing M18 battery systems.

The Teng Tools MB444 160 mm cable cutter has been developed for precise cutting of copper and aluminium cables. It features a pinch guard that enhances safety during use.

The cutter has two cutting modes, allowing the user to adapt the cut according to the cable type and thickness. The reversible handles also allow the tool to be used for stripping cables, increasing its versatility in installation work.

The plastic-coated handles provide a good grip and comfort during use, even in long-term work. Thanks to its 160 mm length, the cutter is easy to handle and suitable for both professionals and DIY users who want a precise and durable tool.

The KNIPEX 95 21 165 is a cable cutter developed for cutting copper and aluminium cables, both single- and multi-stranded. It produces a clean and smooth cut without crushing the conductor, making it suitable for precision work in electrical installations.

The cutter has hardened blades with precision-ground cutting edges, ensuring long service life and efficient cutting performance. It features an opening spring integrated into the joint and protected against loss, as well as an adjustable, self-locking screw joint that provides stability during use.

The handles are coated with plastic for a safe and comfortable grip, and the design includes pinch protection to prevent injuries during work. The tool is brown-phosphated for corrosion protection and has an overall length of 165 mm.

The KNIPEX Cable Cutter 95 21 165 is not suitable for steel wire or hard-drawn copper conductors, but it is ideal for standard installation cables and flexible wires.

The Knipex 95 12 165 is a cable cutter developed to cut both single-stranded and multi-stranded copper and aluminium cables. It produces a smooth and clean cut without compressing the conductor, making it suitable for precision work in electrical installations.

The cutter features hardened blades with precision-ground cutting edges, ensuring long service life and efficient cutting performance. The brown-finished surface protects against corrosion, and the multi-component handle provides a secure and comfortable grip during use.

The adjustable, self-locking joint adds stability and precision, while the pinch guard enhances safety when operated with one hand. The tool is not suitable for steel wire or hard-drawn copper conductors.

With a length of 165 mm and a cutting capacity of up to 50 mm² (or Ø 15 mm) for multi-stranded copper cables, this model is a compact and efficient choice for professionals and demanding users.

The Milwaukee Jaw + Blade Cable Cutter M18HCC GW is a spare part and accessory designed for use with the Milwaukee M18HCC cable cutter. The set consists of a pair of jaws and a blade, which together enable precise cutting of EHS wire and steel wire.

The components are made to withstand high loads and ensure a clean and controlled cut, which is important in professional installation and assembly tasks. The combination of jaws and blade allows the tool’s performance to be maintained over time, even with frequent use.

The product is delivered as a complete set with both jaw and blade, ready to be installed in compatible Milwaukee M18HCC devices. It is intended for users who wish to replace worn parts or adapt the tool to specific material types.

The Teng Tools 250 mm MB444 cable cutter has been developed for efficient cutting of both copper and aluminium cables. It features a compression guard that reduces the risk of cable damage during work and provides the user with better control during cutting.

The cutter has two cutting modes that allow adjustment of power and precision according to the cable type. The reversible handles can also be used for stripping, making the tool multifunctional for installation work.

Plastic-coated handles ensure a good grip and increase comfort, while the compact 250 mm length makes the cutter easy to use in confined workspaces.

The KNIPEX Cable Cutter 280 mm has been developed for precise and clean cutting of single and multi-stranded copper and aluminium cables. It is not suitable for steel wire or steel ropes, which highlights its specialisation in softer metals.

The cutter features hardened blades with precision-ground cutting edges that ensure smooth cuts without crushing the cable. It uses a ratchet mechanism that allows one-handed operation and significantly reduces the required force thanks to a high transmission ratio.

The two-stage gear mechanism facilitates cutting thicker cables, while the compact and lightweight design provides good control even in confined spaces. The pinch guard reduces the risk of injury during use.

The tool is made of specially hardened tool steel and has a painted black finish. It is insulated according to VDE, EN 60900, and IEC 60900 standards, making it suitable for working on live parts within defined safety limits.

The 165 mm cable cutter from Knipex has been developed to cut both single-stranded and multi-stranded copper and aluminium cables. It produces a clean and smooth cut without crushing the conductor, making it suitable for precision work in electrical installations.

The cutter features hardened blades with precision-ground cutting edges, ensuring long service life and efficient cutting performance. The chrome-plated surface protects against corrosion and provides a professional appearance.

One-handed operation and pinch protection make the tool safe and comfortable to use. The adjustable, self-locking joint adds stability and precision during work.

The model is VDE approved, meaning it has been tested for work on live circuits up to 1000 V, and it is supplied in SB blister packaging.

The Milwaukee Spare Blade for Cable Cutter M18HCC GW is a replacement blade developed for use with Milwaukee M18HCC GW cable cutters. It is made to handle EHS copper wire and steel wire, making it suitable for demanding cable and steel work tasks.

The blade is designed with precision and wear resistance in mind, allowing it to produce clean cuts and maintain its sharpness over time. As an original Milwaukee accessory, it fits directly into the tool without the need for adjustment.

The product is intended for professional users who want to maintain the efficiency and safety of their Milwaukee cable cutter by using original spare parts.

The Knipex 95 06 230 is a cable cutter developed for precise cutting of copper and aluminium cables. It is not suitable for steel wire ropes or hard-drawn copper conductors but provides clean cuts in soft and multi-stranded conductors without crushing the cable.

The cutter features hardened blades with precision-ground cutting edges, ensuring smooth and controlled cutting. The adjustable screw joint ensures stable and even movement during use.

The handle is plastic-coated and insulated according to VDE standards, making the tool suitable for electrical installation work within applicable safety limits. The high transmission ratio allows cables to be cut with minimal effort.

The blade is made of stainless special steel, hardened and oil-tempered, ensuring long service life and wear resistance.

The Milwaukee Spare Blade Cable Cutter ACSR M18HCC45 is a set of replacement blades that fit the Milwaukee M18 HCC45 cable cutter. The blade is developed to provide clean and precise cuts in ACSR cables (Aluminium Conductor Steel Reinforced), which are often used in electrical installations and distribution work.

As an original Milwaukee spare part, the blade is manufactured to meet the technical and quality requirements of the M18 HCC45 system. This ensures that the tool maintains its cutting ability and reliability over time.

The product is intended for professional users who need to replace worn or damaged cutting blades in their cable cutter to maintain work efficiency and safety.

The Knipex StepCut XL is a cable cutter developed for efficient and precise cutting of copper and aluminium cables. It features a power transmission mechanism that provides a high gear ratio and reduces the manual force required during cutting.

The cutter has two cutting areas: a stepped cutting edge that holds thin and medium cables tightly near the joint, and a front cutting edge that allows for gradual cutting of very thick cables. This design provides controlled and even cutting.

Thanks to the long handles and narrow head, good reach is achieved even in tight spaces. The handles are made of three ergonomic components, ensuring a comfortable grip during use.

The cutting edges are laser-hardened to about 56 HRC hardness, promoting long service life and precision. The cutter is not suitable for steel-reinforced cables such as ACSR.

The Milwaukee Jaw + Blade Cable Cutter -CU/ALU is a replaceable cutting jaw used for cutting standard Cu and Al cables. It is part of Milwaukee's HCCT series and comes with included blades, providing the user with a complete solution for efficient cable handling.

The jaw is designed to produce clean and precise cuts, which is important in electrical installation work where cable ends must remain intact. The combination of the jaw and blade allows for high performance and safety during use.

The product is intended as a spare part or replacement component for compatible Milwaukee cable cutters and is made from materials that withstand repeated stress in professional environments.

The Knipex 95 32 320 is a cable cutter designed to make precise cuts in copper and aluminium cables. It uses an innovative 3-speed gear transmission that provides a high gear ratio and allows cables to be cut with one or two hands.

The cutter has hardened blades with precision-ground cutting edges that ensure a clean and straight cut without crushing the conductors. It is not suitable for steel wire, wire ropes, or very fine, flexible conductors.

With a length of 320 mm and a weight of 825 g, the tool is both sturdy and easy to handle even in confined working conditions. The fixed foot provides stability during cutting, and the multi-component handles ensure a secure and comfortable grip.

The surface is black atramentised, providing a certain resistance to corrosion and wear. The cutter can cut Cu and Al cables with a diameter of up to 60 mm or a cross-section of 600 mm².

The Milwaukee Jaw + Blade Cable Cutter -CU/ALU is a standard module used for cutting copper and aluminium cables. The unit consists of both the jaw and the blade, making it suitable as a spare or replacement part for compatible Milwaukee cable cutters.

The design has been developed to produce clean and precise cuts in conductor materials, which is important for both safety and efficiency in electrical installations. The combination of the jaw and blade ensures that the user gets a complete cutting solution without separate components.

The product is part of Milwaukee's accessory programme and is manufactured with a focus on durability and long service life to withstand repeated use in professional environments.